Led Blinking #2

hey guys i am sorry for making you wait me all of this time but i had some hard times but it's okay.
so let's go now to complete this led blinking...
in the previous post we stopped at the connections of the arduino.
*flash back* in the arduino we got 14 pin in the arduino +ve and 3 pins -ve so here the pic of it just to remember

as we see here is all of the pins 14 +ve and 3 GND -ve.

okay so we got some wires called jumpers and they are especially for the arduino sockets and here is a pic.

as we see they are stacked like this there are two types of them male to male and they are shown in the pic here and male to female they have one of that iron pin there and empty socket and female to female it has empty to empty sockets and here are going to be using the male to male jumpers.

okay for another thing we got something named with bread board it's like a sketchy board to test your electric circuit and we got pic of it here.

it has many shapes with different sizes we got the medium one here ...so this board is connected to each other as we see the yellow lines are connected vertically and the green are connected horizontally to gives the board power okay so lets know how to connect it with the led..

and here we go we took a jumper male to male from pin 3 to one socket of bread board and another male to male from the GND socket to have stable -ve and +ve power then we connected the led the long leg to + and the short one to the -.

and thats all for that post today i hope u test it and it works with you and again sorry for being so late.